|
Name: a A Throne of Swords...my version.
Code: N/A
As the heading says, a throne made from many many swords. Height is about 15 cms and weight about 800grms. Comes in a pewter finish or a bronze finish.Cunningly designed to allow your iphone charging cable to slip up into it and allows you to sit your iphone on it whilst being charged. Otherwise it would just be another dust collector. (see photo)
Pewter version .. No longer available cause the modern phones no longer fit..sorry about that.
|
|
|
Name: A Throne of Swords with iphone being charged
Iphone fits nicely into throne. I was going to have a picture of that bloke from the Lord of the Rings sitting on the throne, pictured on the phone, sitting on the throne . All became too hard, even to say!
|
|
|
Name: A Throne of Swords...my version ,
|
|
|
Name: A Throne of Swords...my version, another picture
Different view.You can see the carefully designed slot in the rear of the middle of the seat part where your charging cable will go.You feed the cable down thru the hole from the top, and as the throne is hollowed out underneath, the cable passes under the seat and out thru an exit slot at the rear of the throne.
Please note: this throne is solid metal not plastic or poly resin or cold cast crap
|
|
|
Name: A. Eagle to the rescue
New Limited edition sculpture I have just finished.It is 48cm high (19 inches) and weighs 17.50 Kg. packed
|
|
|
Name: A.Eagles to the rescue.
A different view of this new limited edition sculpture.
|
|
|
Name: AA. Eagles to the rescue
This is a limited edition piece I have just finished. It is 48cm or 19 inches tall and weighs about 17.5kg.packed
|
|
|
Name: AA.Lord of the Eagles to the rescue
|
|
|
Name: AAA. Lord of the Eagles to the rescue.
Side view
|
|
|
Name: BATTLE AT KAZAD-DUM
Code: 277437
Height 27cm width 31cm. My version of a Balrog, much closer to the description in the book than the film one.Read the passage carefully and you will see that 1. It was not on fire.The flames were coming from the torches held by the orcs behind it.2. It was not a flaming sword,but a curvy bladed scimitar, 3 It was not a flaming whip but a whip of many thongs,IE a cat of nine tales. However the flames looked good on film.This limited edition sold out quickly and the only place you are likely to find one now is probably on ebay.Expect to pay in excess of $4500
|
|
|
Name: BILBO AND THE THREE TROLLS
Code: 277441
The scene from the book"The Hobbit" where bilbo tricks the trolls into argueing until dawn . Height 20cm.My original Bilbo was replaced by one that Selangor had carved by somebody else.
|
|
|
Name: GANDALFS RESCUE FROM ORTHANC-LIMITED EDITION
Code: 277436
This awesome figurine was limited to 500 numbered pieces world wide.The edition sold out quickly. I have contact with collectors who may be induced to sell for the right price. If you are interested ,email sculptorsworkshop@bigpond .com or try ebay. Expect to pay in excess of $5000
|
|
|
Name: THE GUARDIAN AND THE THIEF: SMAUG AT HIS BEST
Code: 277438
31 cm tall. One of the best Smaugs I have carved and I have carved at least 30 different smaugs. Notice that Bilbo has the ring on his finger, hence he must be invisible.Edition sold out but collectors have been known to sell their prescioussses.Try ebay but expect to pay in excess of $4000
|
|
|
Name: THE SHIELD MAIDEN AND THE RING WRAITH
Code: 277439
Height 39cn. This sculpture shows the scene during the battle at Pellenor fields where Eowyn the Shield Maiden confronts the King of the Ringwraiths mounted on his Winged Beast.Edition sold out,
|
|
|
Name: TREE BEARD-THE SHEPHERD OF THE TREES-WITH MERRY AND PIPPEN
Code: 277440
Height 22cm A limited edition sculpture of Tree beard and company. One version of several ents I have carved over the years. Quite happy with the way this one turned out
|
|
|
Name: xxx For possible sale
Lee Nankervis at lee.nankervis@btinternet.com has the following sculptures that he may be interested in parting with.
Battle at Kazad-dum
Gandalf rescue
The Guardian and Thief
The Shield Maiden
Tree Beard.
Email him if interested.
|
|
|
Name: DRAGON SUMMONER
Code: 800CA
|
|
|
Name: Sir Ching
Code: A
|
|
|
Name: Sir Coat
|
|
|
Name: Sir Eal
|
|
|
Name: Sir Enade
Code: N/A
pewter figurine. The first of the "sir" series. Height 12cm. I hope you get the Sir joke.
|
|
|
Name: Sir Ender
Code: Sirs-se
|
|
|
Name: Sir Feit
Code: Sir-sf
|
|
|
Name: Sir Gerry Kneaded
Code: Sirs-sk
|
|
|
Name: Sir Kumcision
|
|
|
Name: Sir Loin
Code: Sirs-sl
|
|
|
Name: Sir Pent
Code: Sirs-sp
|
|
|
Name: Sir Prize
Code: N/A
Suprise..... get it?
|
|
|
Name: Sir Vent
Code: Sirs-sv
|
|
|
Name: 5 Kg skull and brain. (award)
|
|
|
Name: A pen in the shape of a sword in a rock.
|
|
|
Name: copy of the 1956 olympic torch
|
|
|
Name: Warren Cup
|
|
|
Name: Warren Cup
I was commissioned to carve a replica of the British Museums "Warren Cup". After finishing it I came to the firm conviction that its a fake and the "Ancients " who were supposed to have carved the original one - didn't. The composition of the figures is amateurish, the anatomy is bad and the whole cup looks like it was assembled from sculptural elements taken from other works.
|
|
|
Name: Yabby sculpture for an award
|
|
|
Name: Hobbit figurine
Code: Hog fig
A general all purpose hobbit.Height 11cm
|
|
|
Name: Orc figurine
Code: orc.fig
A generic ORC. Height 11cm
|
|
|
Name: Unicorn
Code: unicorn
height 10cm. Solid polished pewter
|
|
|
Name: Bear
Code: Bear for chess set
This is the prototype I have carved for my new chess set , to be called the Bulls and Bears chess set. It will be the "King" on the dark side, the Bear side, of the chess set.It is based on a cartoon bear that appeared in an early 20th century American newspaper and was related to Teddy Roosevelt and his so called Teddy Bear.
The idea of this chess set is to represent the Bulls.(.The rich ) versus the Bears ( the Poor ). The big argument here is which side should be the Dark side and what characters should be portrayed. I have as of today , 15/4/10, FINALLY FINISHED THIS CHESS SET, and I am moulding the pieces as I write this blurb. Finished set will be photographed and posted within the next couple of weeks.I have designed the pieces and costumed them in the "great depression" of the 30's attire. This set fits nicely into the current global financial burp we have just pulled thru.
|
|
|
Name: Bull
Code: Bull for Bull/bear chess set
This bull is based on a cartoon from Punch magazine of the late 1800 and is a representation of John Bull who was used to typify big business in cartoons in those days.
This set is now finished and will be made in a limited edition of 300 world wide.
I will post a picture of it in the next week or so.
|
|